Regional Architecture Logo
 

Send Your Comments

E-Mail

TMC Traffic Information Dissemination Equipment Package

Architecture Geographic Scope

Description:

Controls dissemination of traffic-related data to other centers, the media, and travelers via the driver information systems (DMS, HAR) that it operates.

 

Included in:

City of Livingston Traffic Operations Center
City of Lufkin Traffic Operations Center
City of Nacogdoches Traffic Operations Center
Municipal or County Traffic Operations Center
TxDOT Fort Worth TMC (TransVision)
TxDOT Lufkin District TMC
TxDOT Statewide Highway Conditions Reporting System

Functional Requirements:

1The center shall remotely control dynamic messages signs for dissemination of traffic and other information to drivers.
2The center shall remotely control driver information systems that communicate directly from a center to the vehicle radio (such as Highway Advisory Radios) for dissemination of traffic and other information to drivers.
3The center shall collect operational status for the driver information systems equipment (DMS, HAR, etc.).
4The center shall collect fault data for the driver information systems equipment (DMS, HAR, etc.) for repair.
5The center shall retrieve locally stored traffic information, including current and forecasted traffic information, road and weather conditions, traffic incident information, information on diversions and alternate routes, closures, and special traffic restrictions (lane/shoulder use, weight restrictions, width restrictions, HOV requirements), etc.
6The center shall distribute traffic data to maintenance and construction centers, transit centers, emergency management centers, and traveler information providers.
7The center shall distribute traffic data to the media upon request; the capability to provide the information in both data stream and graphical display shall be supported.
8The center shall provide the capability for center personnel to control the nature of the data that is available to non-traffic operations centers and the media.
  

User Service Requirements (fully or partially addressed):

1.0TRAVEL AND TRAFFIC MANAGEMENT
1.5TRAVELER SERVICES INFORMATION
1.5.2TSI shall include an Information Access function that allows travelers to access the available information.
1.5.2.5Information Access shall provide the capability for travelers to access the TSI information via any of, but not limited to, the following methods:
1.5.2.5(a)Highway advisory radio.
1.6TRAFFIC CONTROL
1.6.0ITS shall include a Traffic Control (TC) function. Traffic Control provides the capability to efficiently manage the movement of traffic on streets and highways. Four functions are provided, which are, (1) Traffic Flow Optimization, (2) Traffic Surveillance, (3) Control, and (4) Provide Information. This will also include control of network signal systems with eventual integration of freeway control.
1.6.1TC shall include a Traffic Flow Optimization function to provide the capability to optimize traffic flow.
1.6.1.7Implementation of the Control function shall include strategies that account for at least the following:
1.6.1.7(a)Human factors.
1.6.3TC shall include a Device Control function.
1.6.3.3The Device Control function shall provide the capability to exercise control over those devices utilized for traffic control.
1.6.3.3.2Device Control shall include the capability to dynamically control traffic signing.
1.6.3.4Device Control shall communicate control data to the following devices.
1.6.3.4(c)Information signs.
1.6.3.4(e)Human operator support.
1.6.3.4.1Traffic Surveillance shall include a data process function to process the traffic data which are acquired.
1.6.4Device Control shall provide traffic control information to other elements of the ITS, including but not limited to the following:
1.6.4(a)In-vehicle navigation.
1.6.4(b)Trip planning.
1.6.4(c)Routing systems.
1.6.4(d)Fleet management systems.
1.7INCIDENT MANAGEMENT
1.7.0ITS shall include an Incident Management (IM) function. Incident Management will identify incidents, formulate response actions, and support initiation and ongoing coordination of those response actions. Four major functions are provided, which are, (1) Incidents Identification, (2) Response Formulation, (3) Response Implementation, and (4) Predict Hazardous Conditions.
1.7.1Incident Management shall provide an Incident Identification function to identify incidents.
1.7.1.1The Incident Identification function shall include the capability to identify predicted incidents.
1.7.1.1.1The Incident Identification function shall use information from the following types of sources, where available, to identify predicted incidents:
1.7.1.1.1(d)Media sources.
1.7.3IM shall include a Response Implementation function to provide the services to implement a response coordinated with all appropriate agencies.
1.7.3.3The Response Implementation function shall provide the capability to disseminate information relating to response status to other agencies and user services.
1.7.4IM shall provide the capability to Predict Hazardous Conditions, including the time and location of hazardous conditions that may cause an incident.
5.0EMERGENCY MANAGEMENT
5.1EMERGENCY NOTIFICATION AND PERSONAL SECURITY
5.1.3ENPS shall include a Remote Security and Emergency Monitoring (RSEM) function to create an environment of safety in secure areas.
5.1.3.5RSEM shall include a Physical Security System (PSS) function.
5.1.3.5.2PSS shall allow system operators to monitor and control operation of the physical security system devices, including operator override.
5.1.3.5.3PSS shall provide current status of the system including readiness and activation to operators.
5.1.3.5.4PSS shall warn travelers of impending security system deployment via local information systems.
5.1.5ENPS shall include a Protect Sensitive Traveler Information (PSTI) function to inhibit distribution of traveler information that is deemed to be sensitive.
5.1.5.1PSTI shall notify transportation operators and information providers when access to information from ITS surveillance and sensor systems must be restricted.
5.1.5.2The PSTI notification shall identify the geographic area, time, specific devices, and/or other information necessary to determine the traveler information that must be protected.
5.1.5.3PSTI shall restrict access to traveler information for the affected area until access restrictions are removed.
5.1.5.4PSTI shall notify transportation operators and information providers when traveler information access restrictions are removed.
5.3DISASTER RESPONSE AND EVACUATION
5.3.0ITS shall provide a Disaster Response and Evacuation (DRE) function that provides for effective, coordinated management of the surface transportation system during all types of disasters including natural disasters (hurricanes, earthquakes, floods, severe winter storms, tsunamis, etc.), terrorist acts, and other catastrophic events (e.g., nuclear power plant disasters). Two primary subservices are provided: (1) Disaster Response and (2) Evacuation Coordination. The Disaster Response Subservice provides support for planning, transportation management, resource sharing, and information coordination between transportation agencies and principal responding agencies (emergency management, public safety, and other allied agencies) to improve the effectiveness and safety of a disaster response. The Disaster Response Subservice consists of eight major functions: 1) Coordinate Response Plans, 2) Monitor Alert Levels, 3) Detect and Verify Emergency, 4) Assess Infrastructure Status, 5) Coordinate Response, 6) Critical Service Restoration, 7) Manage Area Transportation, and 8) Disaster Traveler Information. The Evacuation Coordination (EC) Subservice efficiently manages an evacuation and provides evacuees with the information they need during evacuation and subsequent reentry to the evacuated area. The Evacuation Coordination (EC) subservice includes four additional major functions: 9) Evacuation Planning Support, 10) Evacuation Traveler Information, 11) Evacuation Transportation Management, and 12) Evacuation Resource Sharing.
5.3.2Disaster Response shall provide a Monitor Alert Levels (MAL) function.
5.3.2.2MAL shall increase system preparedness as the alert level or the likelihood of a disaster increases, taking actions including:
5.3.2.2(c)Review and update resource inventories
8.0MAINTENANCE AND CONSTRUCTION MANAGEMENT
8.1MAINTENANCE AND CONSTRUCTION OPERATIONS
8.1.1Maintenance and Construction Operations shall provide a Maintenance Vehicle Fleet Management (MVFM) function to schedule and dispatch, monitor and track location, and monitor operational condition and maintenance requirements of public and contracted fleets of maintenance, construction, and specialized service vehicles. This function includes interactions among Traffic Managers, Supervisors, Dispatchers, Field Crews, Construction Crews, Vehicle Maintenance Crews, Equipment Maintenance Crews, Weather Services Organizations, and Information Service Providers.
8.1.1.6MVFM shall be capable of providing dispatchers and operators of maintenance, construction, and specialized service vehicles with information regarding potential and actual roadway problems.
8.1.1.6.1MVFM shall provide information to dispatchers and vehicle operators, including but not limited to:
8.1.1.6.1(a)Congestion
8.1.1.6.1(b)Incidents
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

Last updated on 05-25-2005 using Ronald C. Ice and Associates Web Spinner Technology.