KIPDA Regional ITS Architecture

Element Expanded Functional Requirements: Louisville Metro Maintenance Vehicles


Functional Area: MCV Roadway Maintenance and Construction
  1. The maintenance and construction vehicle shall track the location and status of safety systems on-board the vehicle.
  2. The maintenance and construction vehicle shall respond to control information from the center to allow remote operation of the on-board vehicle systems. These systems include routine maintenance equipment for cutting, repairs, hazard removal, etc.
  3. The maintenance and construction vehicle shall monitor materials information including remaining quantity and current application rate of materials on the vehicle.
  4. The maintenance and construction vehicle shall respond to dispatch information from the center, presented to the vehicle operator for acknowledgement and returning status.
  5. The maintenance and construction vehicle shall send operational data to the center including the operational state of the maintenance equipment (e.g., blade up/down, spreader pattern), types and quantities of materials used for construction and maintenance activities, and a record of the actual work performed.
Functional Area: MCV Vehicle Location Tracking
  1. The maintenance and construction vehicle shall track its current location.
  2. The maintenance and construction vehicle shall send the time stamped vehicle location to the controlling center.
Functional Area: MCV Vehicle Safety Monitoring
  1. The maintenance and construction vehicle shall detect that a vehicle has intruded upon the boundary of a work zone. The boundary of the work zone represents an area around the maintenance and construction vehicle, which may be stationary or moving.
  2. The maintenance and construction vehicle shall receive work zone warnings from the field equipment at the roadside, other maintenance and construction vehicles.
  3. The maintenance and construction vehicle shall present work zone warnings to the field personnel using direct warning signals or in-vehicle signage functions.
  4. The maintenance and construction vehicle shall monitor the crew movements to identify when a crew member is crossing the boundary between a work zone and vehicle traffic and issue an alert to the crew member.
  5. The maintenance and construction vehicle shall provide status of the work zone warning systems to the center.
Functional Area: MCV Vehicle System Monitoring and Diagnostics
  1. The maintenance and construction vehicle shall collect vehicle diagnostics and operating status data from the maintenance vehicle platform including engine temperature, mileage, tire wear, brake wear, belt wear, and other operational status measures as well as the status of maintenance and construction-specific systems on the vehicle.
  2. The maintenance and construction vehicle shall use the diagnostic and status information to support scheduling vehicle maintenance, monitoring safety status, and informing the vehicle operator of the conditions.
  3. The maintenance and construction vehicle shall the vehicle diagnostic and safety information to an equipment repair facility.
  4. The maintenance and construction vehicle shall send the vehicle diagnostic and safety information to the controlling maintenance center.
Functional Area: MCV Winter Maintenance
  1. The maintenance and construction vehicle shall track the location and status of safety systems on-board the vehicle.
  2. The maintenance and construction vehicle shall respond to control information from the center to allow remote operation of the on-board vehicle systems. These systems include winter maintenance equipment for plowing, treating, and anti-icing.
  3. The maintenance and construction vehicle shall monitor materials information including remaining quantity and current application rate of materials on the vehicle.
  4. The maintenance and construction vehicle shall respond to dispatch information from the center, presented to the vehicle operator for acknowledgement and returning status.
  5. The maintenance and construction vehicle shall send operational data to the center including the operational state of the maintenance equipment (e.g., blade up/down, spreader pattern), types and quantities of materials used for construction and maintenance activities, and a record of the actual work performed.
  6. The maintenance and construction vehicle shall exchange operational and environmental data with other maintenance and construction vehicles. Operational data includes operational state of the maintenance equipment (e.g., blade up/down, spreader pattern, equipment configuration) and a record of the actual work performed while the environmental data includes environmental sensor data collected on-board a maintenance and construction vehicle, either raw or processed data.
Functional Area: MCV Work Zone Support
  1. The maintenance and construction vehicle shall monitor, operate, and control work zone devices located at or alongside the roadway. The devices operated on board the vehicle include driver information devices (e.g. dynamic message signs) and work zone intrusion detection and alert devices.
  2. The maintenance and construction vehicle shall provide an interface for field personnel to input status of their work zone activities.
  3. The maintenance and construction vehicle shall collect inputs from field personnel and from work zone devices on-board the maintenance and construction vehicle and send them to the controlling center.