Regional Architecture Logo
 

Send Your Comments

E-Mail

MCV Roadway Maintenance and Construction Equipment Package

Architecture Geographic Scope

Description:

This equipment package includes the on-board systems that support routine non-winter maintenance on a roadway system or right-of-way. Routine maintenance includes landscape maintenance, hazard removal (roadway debris, dead animals), routine maintenance activities (roadway cleaning, grass cutting), and repair and maintenance of both ITS and non-ITS equipment on the roadway (e.g., signs, traffic controllers, traffic detectors, dynamic message signs, traffic signals, etc.).

 

Included in:

TxDOT Maintenance and Construction Vehicles

Processes:

9.1.1Manage M&C Systems On-Board
9.1.2Collect M&C Vehicle Data On-Board
9.1.6Provide M&C Vehicle Operator Interface for Maint
  

User Service Requirements (fully or partially addressed):

8.0MAINTENANCE AND CONSTRUCTION MANAGEMENT
8.1MAINTENANCE AND CONSTRUCTION OPERATIONS
8.1.1Maintenance and Construction Operations shall provide a Maintenance Vehicle Fleet Management (MVFM) function to schedule and dispatch, monitor and track location, and monitor operational condition and maintenance requirements of public and contracted fleets of maintenance, construction, and specialized service vehicles. This function includes interactions among Traffic Managers, Supervisors, Dispatchers, Field Crews, Construction Crews, Vehicle Maintenance Crews, Equipment Maintenance Crews, Weather Services Organizations, and Information Service Providers.
8.1.1.1MVFM shall be capable of monitoring and tracking the locations of public and contracted fleets of maintenance, construction, and specialized service vehicles to provide current location and status information.
8.1.1.1.1MVFM shall be capable of monitoring and tracking the locations of fleets of maintenance, construction, and specialized service vehicles, including but not limited to:
8.1.1.1.1(a)Roadway maintenance trucks
8.1.1.1.1(b)Other motorized roadway maintenance equipment
8.1.1.1.1(c)Roadway construction trucks
8.1.1.1.1(d)Other motorized roadway construction equipment
8.1.1.1.1(f)Snow plows
8.1.1.1.1(g)Salt / sand trucks
8.1.1.1.1(h)Bucket trucks
8.1.1.1.1(i)Vegetation Control and Grass cutting equipment
8.1.1.1.1(j)Traffic control vehicles
8.1.1.1.1(k)Street and drainage cleaning vehicles
8.1.1.1.2MVFM shall be capable of monitoring information regarding fleets of maintenance, construction, and specialized service vehicles, including but not limited to:
8.1.1.1.2(a)Location
8.1.1.1.2(b)Speed
8.1.1.1.3MVFM shall be capable of tracking the past location and movement of maintenance, construction, and specialized vehicles.
8.1.1.3MVFM shall be capable of supporting interactive data communications between dispatchers and operators of public and contracted maintenance, construction, and specialized service vehicles.
8.1.1.3.1MVFM shall be capable of communicating information to vehicle operators, including but not limited to:
8.1.1.3.1(a)Routing information
8.1.1.3.1(b)Scheduling data
8.1.1.3.1(c)Dispatch instructions
8.1.1.3.1(d)Corrective actions
8.1.1.3.1(e)Environmental information (road and weather conditions)
8.1.1.3.2MVFM shall be capable of communicating information from vehicle operators, including but not limited to:
8.1.1.3.2(a)Work data
8.1.1.3.2(b)Operator status
8.1.1.3.2(c)Crew status
8.1.1.3.2(d)Equipment status
8.1.1.4MVFM shall be capable of using on-board vehicle sensors to monitor the vehicle diagnostics and operating conditions of public and contracted fleets of maintenance, construction, and specialized service vehicles.
8.1.1.4.1MVFM shall be capable of collecting information on the operating conditions of vehicles, including but not limited to:
8.1.1.4.1(a)System status (e.g. status of brake system, oil pressure, etc.)
8.1.1.4.1(b)Engine temperature
8.1.1.4.1(c)Mileage
8.1.1.4.1(d)Tire wear
8.1.1.4.1(e)Brake wear
8.1.1.4.1(f)Belt wear
8.1.1.5MVFM shall be capable of using on-board vehicle sensors to monitor roadway conditions and vehicle functions, including but not limited to:
8.1.1.5(b)Operating status (e.g. materials stored, materials usage, plow blade up/down, etc.)
8.1.1.6MVFM shall be capable of providing dispatchers and operators of maintenance, construction, and specialized service vehicles with information regarding potential and actual roadway problems.
8.1.1.6.1MVFM shall provide information to dispatchers and vehicle operators, including but not limited to:
8.1.1.6.1(a)Congestion
8.1.1.6.1(b)Incidents
8.1.1.6.1(c)Roadway restrictions
8.1.1.6.1(d)Environmental conditions
8.1.1.6.5MVFM shall provide information to the vehicle operators concerning roadway problem spots and alternate routes because of potential or actual roadway problems.
8.1.1.7MVFM shall be capable of communicating status information to other maintenance, construction or specialized service vehicles.
8.1.2Maintenance and Construction Operations shall provide a Roadway Management (RWM) function to monitor traffic, road surface, and environmental conditions and forecast traffic and road surface conditions to support management of routine and hazardous road condition remediation and to communicate changes in conditions. This function includes interactions among Traffic Managers, Supervisors, Dispatchers, Field Crews, Construction Crews, Asset Managers, Planning Agencies, and Weather Services Organizations.
8.1.2.1RWM shall support a number of different services, including but not limited to:
8.1.2.1(a)Winter maintenance (plowing, treating, anti-icing, de-icing, etc.)
8.1.2.1(b)Hazard removal (removing trash, animals, etc.)
8.1.2.1(d)Routine maintenance activities (cleaning, cutting, etc.)
8.1.2.1(e)Repair activities
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

Last updated on 02-06-2003 using Ronald C. Ice and Associates Web Spinner Technology.