AMPA Regional ITS Architecture Update

Architecture Flow Descriptions

This is an alphabetical listing of each architecture flow in the AMPA Regional ITS Architecture Update and its definition.

Architecture Flow Architecture Flow Description
air quality information Aggregated region-wide measured air quality data and possible pollution incident information.
alarm acknowledge Confirmation that alarm was received, instructions and additional information for the alarm initiator, and requests for additional information.
alarm notification Notification of activation of an audible or silent alarm by a traveler in a public area or by a transit vehicle operator using an on-board device.
amber alert confirmation_ud Confirmation that the amber alert system commands have been received. Confirmation may include the messages that was activated and displayed.
amber alert information_ud Information regarding amber alerts that can be posted on VMS/DMS in the Region.
amber alert system status_ud The status of the amber alert message and the status of the VMS/DMS being utilized for the message.
amber alert_ud Amber alert information to be placed on dynamic message signs controlled by a traffic management element.
archive analysis requests A user request that initiates data mining, analytical processing, aggregation or summarization, report formulation, or other advanced processing and analysis of archived data. The request also includes information that is used to identify and authenticate the user and support electronic payment requirements, if any.
archive analysis results Processed information products, supporting meta data, and any associated transaction information resulting from data mining, analytical processing, aggregation or summarization, report formulation, or other on-line processing and analysis of archived data.
archive coordination Catalog data, meta data, published data, and other information exchanged between archives to support data synchronization and satisfy user data requests.
archive request confirmation Confirmation that an archive request has been received and processed with information on the disposition of the request.
archive requests A request to a data source for information on available data (i.e. "catalog") or a request that defines the data to be archived. The request can be a general subscription intended to initiate a continuous or regular data stream or a specific request intended to initiate a one-time response from the recipient.
archive status Notification that data provided to an archive contains erroneous, missing, or suspicious data or verification that the data provided appears valid. If an error has been detected, the offending data and the nature of the potential problem are identified.
archived data product requests A user-specified request for archived data products (i.e. data, meta data, or data catalogs). The request also includes information that is used to identify and authenticate the user and support electronic payment requirements, if any.
archived data products Raw or processed data, meta data, data catalogs and other data products provided to a user system upon request. The response may also include any associated transaction information.
area pollution data Measured air quality data, including measured levels of atmospheric pollutants including ozone, particulate matter, carbon monoxide, and nitrogen oxides, and operational status of the sensors.
arriving train information Information for a train approaching a highway-rail intersection that may include direction and allow calculation of approximate arrival time and closure duration.
arriving train information_cv Information for a train approaching a highway-rail intersection that may include direction and allow calculation of approximate arrival time and closure duration.
asset inventory Information on pavement, bridges, signs and other assets. This includes asset location, installation information, materials information, vendor/contractor information, current maintenance status, and a variety of other information (e.g., video logs) that define the transportation infrastructure.
asset restrictions Restrictions levied on transportation asset usage based on infrastructure design, surveys, tests, or analyses. This includes standard height, width, and weight restrictions by facility as well as special restrictions such as spring weight restrictions and temporary bridge weight restrictions.
asset status update Changes to status of pavement, bridges, signs and other assets resulting from maintenance or construction activities or infrastructure monitoring. The updates may include changes in installation information, materials information, vendor/contractor information, condition, and current maintenance status. In addition to infrastructure asset updates, the information provided may also include status of the maintenance and construction support assets, including vehicle and equipment utilization and repair records.
bad tag list List of invalid transit user tags which may have previously failed a fare payment transaction.
barrier system control Information used to configure and control barrier systems that are represented by gates, barriers and other automated or remotely controlled systems used to manage entry to roadways.
barrier system status Current operating status of barrier systems. Barrier systems represent gates, barriers and other automated or remotely controlled systems used to manage entry to roadways. Status of the systems includes operating condition and current operational state.
broadcast traveler information General traveler information that contains traffic and road conditions, link travel times, incidents, advisories, restrictions, transit service information, weather information, parking information, and other related traveler information.
care facility status Information regarding facility type and capabilities, facility status, and its ability to admit new patients.
care facility status request Request for information regarding care facility availability and status.
current asset restrictions Restrictions levied on transportation asset usage based on infrastructure design, surveys, tests, or analyses. This includes standard facility design height, width, and weight restrictions, special restrictions such as spring weight restrictions, and temporary facility restrictions that are imposed during maintenance and construction.
current charging status_cv Current charging status including current charge rate, estimated time to completion, and cost associated with the charge.
data collection and monitoring control Information used to configure and control data collection and monitoring systems.
demand response passenger and use data Data collected on board a demand response vehicle relating to the picking up and discharging of passengers.
demand responsive transit plan Plan regarding overall demand responsive transit schedules and deployment.
demand responsive transit request Request for paratransit support.
device control request Request for device control action
device data Data from detectors, environmental sensor stations, and traffic control devices including device inventory information.
device status Status information from devices
electric charging services inventory_cv Aggregate information provided for electric charging stations identifying the location, operating hours, current availability, charging capacity and standards supported, access restrictions, and rates/fee structure for each station.
emergency archive data Logged emergency information including information that characterizes identified incidents (routine highway incidents through disasters), corresponding incident response information, evacuation information, surveillance data, threat data, and resource information. Content may include a catalog of available information, the actual information to be archived, and associated meta data that describes the archived information.
emergency dispatch requests Emergency vehicle dispatch instructions including incident location and available information concerning the incident.
emergency dispatch response Request for additional emergency dispatch information and provision of en route status.
emergency plan coordination Information that supports coordination of emergency management plans, continuity of operations plans, emergency response and recovery plans, evacuation plans, and other emergency plans between agencies. This includes general plans that are coordinated prior to an incident and shorter duration tactical plans that are prepared during an incident.
emergency traffic control information Status of a special traffic control strategy or system activation implemented in response to an emergency traffic control request, a request for emergency access routes, a request for evacuation, a request to activate closure systems, a request to employ driver information systems to support public safety objectives, or other special requests. Identifies the selected traffic control strategy and system control status.
emergency traffic control request Special request to preempt the current traffic control strategy in effect at one or more signalized intersections or highway segments, activate traffic control and closure systems such as gates and barriers, activate safeguard systems, or use driver information systems. For example, this flow can request all signals to red-flash, request a progression of traffic control preemptions along an emergency vehicle route, request a specific evacuation traffic control plan, request activation of a road closure barrier system, or place a public safety or emergency-related message on a dynamic message sign.
emergency transit schedule information Information on transit schedule and service changes that adapt the service to better meet needs of responders and the general public in an emergency situation, including special service schedules supporting evacuation.
emergency transit service request Request to modify transit service and fare schedules to address emergencies, including requests for transit services to evacuate people from and/or deploy response agency personnel to an emergency scene. The request may poll for resource availability or request pre-staging, staging, or immediate dispatch of transit resources.
emergency transit service response Response indicating changes to transit service, fares, and/or restrictions that will be made and status of transit resources to be deployed to support emergency response and/or evacuation.
emergency traveler information Public notification of an emergency such as a natural or man-made disaster, civil emergency, or child abduction. This flow also includes evacuation information including evacuation instructions, evacuation zones, recommended evacuation times, tailored evacuation routes and destinations, traffic and road conditions along the evacuation routes, traveler services and shelter information, and reentry times and instructions.
emergency traveler information request Request for alerts, evacuation information, and other emergency information provided to the traveling public.
emergency vehicle tracking data The current location and operating status of the emergency vehicle.
emissions sensor control Data used to configure and control vehicle emissions sensors.
environmental conditions data Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) as measured and reported by fixed and/or mobile environmental sensors and aggregated by the data collector. Attributes relating to the data collection (and aggregation) are also included.
environmental information data_ud RWIS data to be displayed locally on a DMS.
environmental sensor data Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) as measured and reported by fixed and/or mobile environmental sensors. Operational status of the sensors is also included.
environmental sensors control Data used to configure and control environmental sensors.
environmental situation data_cv Aggregated and filtered vehicle environmental data collected from vehicle safety and convenience systems including measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, anti-lock brake status, and other collected vehicle system status and sensor information. This information flow represents the aggregated and filtered environmental data sets that are provided by the RSE to the back office center. Depending on the RSE configuration and implementation, the data set may also include environmental sensor station data collected by the RSE.
equipment availability An inventory of the maintenance and construction equipment available at the storage facility. This flow includes the type of equipment, enough descriptive information to indicate its suitability for use, and its current status. This flow may contain information for a specific type of equipment or include all equipment available at the facility.
equipment maintenance status Current status of field equipment maintenance actions.
evacuation coordination Coordination of information regarding a pending or in-process evacuation. Includes evacuation zones, evacuation times, evacuation routes, forecast network conditions, and reentry times.
evacuation information Evacuation instructions and information including evacuation zones, evacuation times, and reentry times.
event plans Plans for major events possibly impacting traffic.
external reports Traffic and incident information that is collected by the media through a variety of mechanisms (e.g., radio station call-in programs, air surveillance).
fare collection data Fare collection information including the summary of on-board fare system data and financial payment transaction data.
fare management information Transit fare information and transaction data used to manage transit fare processing on the transit vehicle.
field device status Reports from field equipment (sensors, signals, signs, controllers, etc.) which indicate current operational status.
field device status_ud
field equipment status Identification of field equipment requiring repair and known information about the associated faults.
hov data Current HOV lane information including both standard traffic flow measures and information regarding vehicle occupancy in HOV lanes, and operational status of the HOV monitoring equipment.
hri advisories Notification of Highway-Rail Intersection equipment failure, intersection blockage, or other condition requiring attention, and maintenance activities at or near highway rail intersections.
hri control data Data required for HRI information transmitted at railroad grade crossings and within railroad operations.
hri operational status Status of the highway-rail grade crossing equipment including both the current state or mode of operation and the current equipment condition.
hri request A request for highway-rail intersection status or a specific control request intended to modify HRI operation.
hri status Status of the highway-rail intersection equipment including both the current state or mode of operation and the current equipment condition.
incident command information coordination Information that supports local management of an incident. It includes resource deployment status, hazardous material information, traffic, road, and weather conditions, evacuation advice, and other information that enables emergency or maintenance personnel in the field to implement an effective, safe incident response.
incident information Notification of existence of incident and expected severity, location, time and nature of incident. As additional information is gathered and the incident evolves, updated incident information is provided. Incidents include any event that impacts transportation system operation ranging from routine incidents (e.g., disabled vehicle at the side of the road) through large-scale natural or human-caused disasters that involve loss of life, injuries, extensive property damage, and multi-jurisdictional response. This also includes special events, closures, and other planned events that may impact the transportation system.
incident information for media Report of current desensitized incident information prepared for public dissemination through the media.
incident report Report of an identified incident including incident location, type, severity and other information necessary to initiate an appropriate incident response.
incident response coordination Incident response procedures and current incident response status that are shared between allied response agencies to support a coordinated response to incidents. This flow provides current situation information, including a summary of incident status and its impact on the transportation system and other infrastructure, and current and planned response activities. This flow also coordinates a positive hand off of responsibility for all or part of an incident response between agencies.
incident response status Status of the current incident response including a summary of incident status and its impact on the transportation system, traffic management strategies implemented at the site (e.g., closures, diversions, traffic signal control overrides), and current and planned response activities.
incident status Information gathered at the incident site that more completely characterizes the incident and provides current incident response status.
infrastructure monitoring sensor control Data used to configure and control infrastructure monitoring sensors.
infrastructure monitoring sensor data Data read from infrastructure-based sensors that monitor the condition or integrity of transportation infrastructure including bridges, tunnels, interchanges, pavement, culverts, signs, transit rail or guideway, and other roadway infrastructure. Includes sensor data and the operational status of the sensors.
interactive traveler information Traveler information provided in response to a traveler request. The provided information includes traffic and road conditions, advisories, incidents, payment information, transit services, parking information, weather information, and other travel-related data updates and confirmations.
intersection blockage notification Notification that a highway-rail intersection is obstructed and supporting information.
intersection control status_cv Status data provided by the traffic signal controller including phase information, alarm status, and priority/preempt status.
intersection management application info_cv Intersection and device configuration data and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
intersection management application status_cv Infrastructure application status reported by the RSE. This includes current operational state and status of the RSE and a log of operations.
intersection safety application info_cv Intersection and device configuration data and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
intersection safety application status_cv Infrastructure safety application status reported by the RSE. This includes current operational state and status of the RSE and a record of intersection safety issues identified and alerts and warnings issued.
intersection safety warning_cv A warning of an imminent unsafe vehicle infringement at an intersection that may endanger other vehicles or pedestrians. This allows vehicles approaching the intersection to be warned in the event of an imminent red light or stop sign violation or potential infringement on an occupied crosswalk. All connected vehicles at the intersection receive the warning, including both the infringing vehicle and other vehicles at or near the intersection.
intersection status Intersection status including current operational status, signal phase and timing information, intersection geometry, surface conditions, warnings of potential violations or hazardous conditions, and approaching vehicle information. This may include information about the position, velocity, acceleration, and turning status of approaching vehicles.
intersection status monitoring_cv Current signal phase and timing information for all lanes at a signalized intersection. This flow represents monitoring of communications by a receiver at the intersection to support monitoring for conflicts between actual signal states and RSE communications about those states.
intersection status_cv Current signal phase and timing information for all lanes at a signalized intersection. This flow identifies active lanes and lanes that are being stopped and specifies the length of time that the current state will persist for each lane. It also identifies signal priority and preemption status and pedestrian crossing status information where applicable.
lane closure information_cv Lane closure information provided to passing vehicles. This flow provides information about roadway configuration changes such as lane closures and shifts.
lane management control Information used to configure and control dynamic lane management systems.
lane management information System status including current operational state, violations, and logged information.
lighting system control data Information used to configure and control roadside lighting systems.
lighting system status Status of roadside lighting controls including operating condition and current operational state.
local signal preemption request Direct control signal or message to a signalized intersection that results in preemption of the current control plan and grants right-of-way to the requesting vehicle.
local signal priority request Request from a vehicle to a signalized intersection for priority at that intersection.
logged vehicle routes Anticipated route information for guided vehicles, special vehicles (e.g., oversize vehicles) or groups of vehicles (e.g., governor's motorcade) that may require changes in traffic control strategy.
maint and constr dispatch information Information used to dispatch maintenance and construction vehicles, equipment, and crews and information used to keep work zone crews informed. This information includes routing information, traffic information, road restrictions, incident information, environmental information, decision support information, maintenance schedule data, dispatch instructions, personnel assignments, alert notifications, and corrective actions.
maint and constr dispatch information_ud Information used to dispatch maintenance and construction vehicles, equipment, and crews and information used to keep work zone crews informed. This information includes routing information, traffic information, road restrictions, incident information, environmental information, decision support information, maintenance schedule data, dispatch instructions, personnel assignments, alert notifications, and corrective actions.
maint and constr dispatch status Current maintenance and construction status including work data, operator status, crew status, and equipment status.
maint and constr dispatch status_ud Current maintenance and construction status including work data, operator status, crew status, and equipment status.
maint and constr equipment repair status Current maintenance and repair status of the maintenance and construction vehicle fleet and other support equipment. This information includes a record of all maintenance and repair activities performed.
maint and constr fleet information Information supporting maintenance of the maintenance and construction vehicle fleet and other support equipment. This information includes vehicle status and diagnostic information, vehicle utilization, and coordination of when vehicles will be available for preventative and corrective maintenance.
maint and constr resource coordination Request for road maintenance and construction resources that can be used in the diversion of traffic (cones, portable signs), clearance of a road hazard, repair of ancillary damage, or any other incident response.
maint and constr resource request Request for road maintenance and construction resources that can be used in the diversion of traffic (cones, portable signs), clearance of a road hazard, repair of ancillary damage, or any other incident response. The request may poll for resource availability or request pre-staging, staging, or immediate dispatch of resources.
maint and constr resource response Current status of maintenance and construction resources including availability and deployment status. General resource inventory information covering vehicles, equipment, materials, and people and specific resource deployment status may be included.
maint and constr vehicle conditions Vehicle diagnostics information that is collected, filtered, and selectively reported by a maintenance and construction vehicle. The information includes engine temperature, mileage, tire wear, brake wear, belt wear, and any warnings or alarms concerning the operational condition of the vehicle and ancillary equipment.
maint and constr vehicle location data The current location and related status (e.g., direction and speed) of the maintenance/construction vehicle.
maint and constr vehicle operational data Data that describes the maintenance and construction activity performed by the vehicle. Operational data includes materials usage (amount stored and current application rate), operational state of the maintenance equipment (e.g., blade up/down, spreader pattern), vehicle safety status, and other measures associated with the operation of a maintenance, construction, or other special purpose vehicle. Operational data may include basic operational status of the vehicle equipment or a more precise record of the work performed (e.g., application of crack sealant with precise locations and application characteristics).
maint and constr vehicle system control Configure and control data that supports remote control of on-board maintenance and construction vehicle systems and field equipment that is remotely controlled by the vehicle. For example, the data can be used to adjust material application rates and spread patterns.
maint and constr work plans Future construction and maintenance work schedules and activities including anticipated closures with anticipated impact to the roadway, alternate routes, anticipated delays, closure times, and durations.
maint and constr work plans_ud Future construction and maintenance work schedules and activities including anticipated closures with anticipated impact to the roadway, alternate routes, anticipated delays, closure times, and durations.
maintenance and repair needs Recommended strategies and schedules for maintenance of the transportation infrastructure.
maintenance materials storage status The amount and availability of maintenance materials in storage facilities.
multimodal service data Multimodal transportation schedules and other service information.
parking coordination Information that enables parking management activities to be coordinated between different parking operators or systems in a region.
parking information General parking information and status, including current parking availability.
parking lot data request Request for parking lot occupancy, fares, and availability. The request can be a subscription that initiates as-needed information updates as well as a one-time request for information.
parking lot inputs Instructions for operation of local parking facilities to support regional traffic management objectives (e.g. which parking lot exits to use). Also, includes inputs from traffic sensors to support calculation of parking lot occupancy and support more effective management of parking entrances and exits.
patient status Information that supports assessment of the patient's condition. Information could include general categorization of patient status, patient vital signs, pertinent medical history, and emergency care information.
payment Payment of some kind (e.g., toll, parking, fare) by traveler which, in most cases, can be related to a credit account.
payment request Request for payment from financial institution.
payment violation notification Notification to enforcement agency of a toll, parking, or transit fare payment violation.
payment_ud Payment of some kind (e.g., toll, parking, fare) by traveler which, in most cases, can be related to a credit account.
pedestrian safety information_cv Current pedestrian crossing status including permission to cross, crossing time remaining, and warnings in the event that a vehicle reports an imminent intersection infringement that may impact pedestrians.
personal location_cv The current location (latitude, longitude, and elevation) reported by the personal information device
personal signal service request_cv A request for right of way from a personal device that indicates the type of traveler (pedestrian, special needs pedestrian, bicyclist,…), anticipated time of arrival, travel path, and crossing duration.
personal transit information General and personalized transit information for a particular fixed route, flexible route, or paratransit system.
pollution state data request Aggregated emissions data information request.
probe archive data Probe data that allows calculation of travel times, volumes, and other measures that support transportation planning. Optionally, this flow also includes origin and destination information for vehicles that opt to provide this information.
qualified environmental conditions data Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) that has had quality checks performed on it and has been formatted and consolidated by the Clarus system. Attributes relating to the data collection (and aggregation) are also included.
queue warning application information_cv Information regarding formed or impending queues (location of the end of queue, estimated duration of the queue, and other descriptions of the queue condition) and recommendations for upstream vehicles including speed reduction, lane change, or diversion recommendations. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
queue warning application status_cv Queue warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and identified queues.
queue warning information_cv Information regarding formed or impending queues (location of the end of queue, estimated duration of the queue, and other descriptions of the queue condition) and recommendations for upstream vehicles including speed reduction, lane change, or diversion recommendations.
rail crossing application info_cv Rail crossing and device configuration data and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
rail crossing warning_cv A warning of a train approaching or already in a highway rail intersection.
rail incident response status Status of the rail system’s response to current incidents.
rail location data_ud Rail location data from PTC system.
railroad advisories Real-time notification of railway-related incident or advisory.
railroad schedules Train schedules, maintenance schedules, and other information from the railroad that supports forecast of HRI closures.
reduced speed notification_cv Reduced speed zone information provided to passing vehicles. This flow provides the reduced speed limit, the location and extent of the reduced speed zone, and associated warning information.
reduced speed warning and lane closure information_cv Roadway configuration data, current speed limits including time of day, week, or season speed limits as necessary, and warning parameters and thresholds. Lane closure information is also provided. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
reduced speed warning status_cv Speed warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and notifications, alerts, and warnings issued.
remote surveillance control The control commands used to remotely operate another center's sensors or surveillance equipment so that roadside surveillance assets can be shared by more than one agency.
request for bad tag list Request for list of bad vehicle tag IDs.
request for payment Request to deduct cost of service from user's payment account.
request for vehicle measures Request for vehicle performance and maintenance data collected by onboard sensors.
request transit information Request for transit service information and current transit status.
resource coordination Coordination of resource inventory information, specific resource status information, resource prioritization and reallocation between jurisdictions, and specific requests for resources and responses that service those requests.
resource deployment status Status of resource deployment identifying the resources (vehicles, equipment, materials, and personnel) available and their current status. General resource inventory information and specific status of deployed resources may be included.
resource request A request for resources to implement special traffic control measures, assist in clean up, verify an incident, etc. The request may poll for resource availability or request pre-staging, staging, or immediate deployment of resources. Resources may be explicitly requested or a service may be requested and the specific resource deployment may be determined by the responding agency.
restricted lanes application status_cv Current RSE application status that is monitored by the back office center including the operational state of the RSE, current configuration parameters, and a log of lane use (aggregate profiles of vehicles that checked in to the lane and reported vehicle speeds in the lanes) and RSE communications activity.
restricted lanes parameters_cv Information that defines the location, duration, and operating parameters for lanes that are reserved for the exclusive use of certain types of vehicles (e.g., transit vehicles) or vehicles that meet other qualifications (e.g., number of occupants, low emissions criteria). It identifies the lane(s), the start and stop locations, start and end times, vehicle restrictions, speed limits and platooning parameters.
reversible lane control Control of automated reversible lane configuration and driver information systems.
reversible lane status Current reversible lane status including traffic sensor and surveillance data and the operational status and mode of the reversible lane control equipment.
right-of-way request notification Notice that a request has occurred for signal prioritization, signal preemption, pedestrian call, multi-modal crossing activation, or other source for right-of-way.
road closure directions_ud Directions to emergency management providers (e.g. alternate routes) when there is a road closure for any reason.
road closure information_cv Road closure information provided to passing vehicles. This flow provides information about weather related road closures along with diversion information.
road network conditions Current and forecasted traffic information, road and weather conditions, and other road network status. Either raw data, processed data, or some combination of both may be provided by this architecture flow. Information on diversions and alternate routes, closures, and special traffic restrictions (lane/shoulder use, weight restrictions, width restrictions, HOV requirements) in effect is included along with a definition of the links, nodes, and routes that make up the road network.
road network status assessment Assessment of damage sustained by the road network including location and extent of the damage, estimate of remaining capacity, required closures, alternate routes, necessary restrictions, and time frame for repair and recovery.
road network traffic probe data Aggregated route usage, travel times, and other aggregated data collected from probe vehicles that can be used to estimate current traffic conditions.
road weather advisories_cv Segment-specific weather and road conditions including real-time advisories of deteriorating road and weather conditions, medium-term advisories for the next 2–12 hours, and long-term advisories more than 12 hours into the future. The advisories may include advisories that are issued by the RSE based on locally collected environmental data.
road weather advisory info_cv Road weather advisories and associated configuration and control information that are used to manage the RSE. Advisories include segment-specific weather and road conditions including real-time advisories of deteriorating road and weather conditions, medium-term advisories for the next 2–12 hours, and long-term advisories more than 12 hours into the future. This flow includes a schedule for issuing the included advisories.
road weather advisory status_cv Current RSE application status that is monitored by the back office center including the operational state of the RSE, current configuration parameters, and a log of advisories issued. The advisories may include advisories that are issued by the RSE based on locally collected environmental data (e.g., an ice on bridge advisory).
road weather information Road conditions and weather information that are made available by road maintenance operations to other transportation system operators.
roadside archive data A broad set of data derived from roadside sensors that includes current traffic conditions, environmental conditions, and any other data that can be directly collected by roadside sensors. This data also indicates the status of the sensors and reports of any identified sensor faults.
roadway information system data Information used to initialize, configure, and control roadside systems that provide driver information (e.g., dynamic message signs, highway advisory radio, beacon systems). This flow can provide message content and delivery attributes, local message store maintenance requests, control mode commands, status queries, and all other commands and associated parameters that support remote management of these systems.
roadway information system status Current operating status of dynamic message signs, highway advisory radios, beacon systems, or other configurable field equipment that provides dynamic information to the driver.
roadway maintenance status Summary of maintenance fleet operations affecting the road network. This includes the status of winter maintenance (snow plow schedule and current status).
roadway treatment system control Control data for remotely located, automated devices, that affect the roadway surface (e.g. de-icing applications).
roadway treatment system status Current operational status of automated roadway treatment devices (e.g., anti-icing systems).
roadway warning system control_cv Information used to configure and control roadway warning systems.
roadway warning system status_cv Current operating status of roadway warning systems.
secure area sensor control Information used to configure and control threat sensors (e.g., thermal, acoustic, radiological, chemical), object, motion and intrusion detection sensors. The provided information controls sensor data collection, aggregation, filtering, and other local processing.
secure area sensor data Data provided by threat sensors (e.g., thermal, acoustic, radiological, chemical), and intrusion, motion, and object detection sensors in secure areas indicating the sensor's operational status, raw and processed sensor data, and alarm indicators when a threat has been detected.
secure area surveillance control Information used to configure and control audio and video surveillance systems used for transportation infrastructure security in secure areas. The provided information controls surveillance data collection, aggregation, filtering, and other local processing.
secure area surveillance data Data collected from surveillance systems used to monitor secure areas. Includes video, audio, processed surveillance data, equipment operational status, and alarm indicators when a threat has been detected.
security field equipment status Identification of security sensors and surveillance equipment requiring repair and known information about the associated faults.
selected routes Routes selected based on route request criteria.
service request Request to multimodal (possibly non-roadway) transit provider for general services information and specific trip information or reservation.
service response Multimodal (possibly non-roadway) transit provider services information and trip reservation confirmations.
signal control commands Control of traffic signal controllers or field masters including clock synchronization.
signal control device configuration Data used to configure traffic signal control equipment including local controllers and system masters.
signal control plans Traffic signal timing parameters including minimum green time and interval durations for basic operation and cycle length, splits, offset, phase sequence, etc. for coordinated systems.
signal control status Operational and status data of traffic signal control equipment including operating condition and current indications.
signal fault data Faults from traffic signal control equipment.
signal service request_cv A call for service or extension for a signal control phase that is issued by the RSE for connected vehicles approaching an intersection and/or pedestrians at a crosswalk. This flow identifies the desired phase and service time.
signal system configuration Data used to configure traffic signal systems including configuring control sections and mode of operation (time based or traffic responsive).
speed management application information_cv Current speed targets, advisories, and limits including time of day, week, or season speed limits as necessary, and application parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
speed management application status_cv Speed management application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and current speed targets, advisories, and limits.
speed management information_cv Target speeds, speed advisories, and/or speed limit information provided to a vehicle. The information includes the current speed value(s), the route segment(s) and lane(s) where the speeds apply, and an indication of whether the speeds are suggested target speeds, posted advisory speeds, or enforceable speed limit values. This flow may also include information about the reason for reduced speeds and provide target lane information if lane changes are required.
speed monitoring control Information used to configure and control automated speed monitoring, speed warning, and speed enforcement systems.
speed monitoring control_cv Information used to configure and control automated speed monitoring, speed warning, and speed enforcement systems.
speed monitoring information System status including current operational state and logged information including measured speeds, warning messages displayed, and violation records.
speed monitoring information_cv System status including current operational state and logged information including measured speeds, warning messages displayed, and violation records.
storage facility request Request for information about the equipment and/or materials available at a maintenance storage facility.
suggested route Suggested route for a dispatched emergency or maintenance vehicle that may reflect current network conditions and the additional routing options available to en route emergency or maintenance vehicles that are not available to the general public.
threat information Threats regarding transportation infrastructure, facilities, or systems detected by a variety of methods (sensors, surveillance, threat analysis of advisories from outside agencies, etc.
threat information coordination Sensor, surveillance, and threat data including raw and processed data that is collected by sensor and surveillance equipment located in secure areas.
toll data Current toll schedules for different types of vehicles as well as advanced toll payment information.
toll data request Request made to obtain toll schedule information or pay a toll in advance. The request can be a subscription that initiates as-needed information updates as well as a one-time request for information.
toll instructions Information provided to configure and support toll plaza operations including toll pricing information.
toll probe data Aggregate probe data derived from electronic toll collection operations. Data collected could include vehicle speeds and travel times for a given link or collection of links.
toll transactions Detailed list of transactions from a toll station.
track status Current status of the wayside equipment and notification of an arriving train.
traffic archive data Information describing the use and vehicle composition on transportation facilities and the traffic control strategies employed. Content may include a catalog of available information, the actual information to be archived, and associated meta data that describes the archived information.
traffic control priority request Request for signal priority at one or more intersections along a particular route.
traffic control priority status Status of signal priority request functions at the roadside (e.g. enabled or disabled).
traffic count information_ud
traffic count station control_ud
traffic flow Raw and/or processed traffic detector data which allows derivation of traffic flow variables (e.g., speed, volume, and density measures) and associated information (e.g., congestion, potential incidents). This flow includes the traffic data and the operational status of the traffic detectors.
traffic images High fidelity, real-time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications.
traffic images_ud High fidelity, real-time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications. This flow includes the images and the operational status of the surveillance system.
traffic metering control Control commands and operating parameters for ramp meters, interchange meters, mainline meters, and other systems equipment associated with roadway metering operations.
traffic metering status Current operational status and operating parameters for ramp meters, interchange meters, mainline meters and other control equipment associated with roadway metering operations.
traffic monitoring application info_cv Traffic monitoring application parameters and thresholds that control the filtering, aggregation, and range of measures that are collected, derived, and reported. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
traffic monitoring application status_cv Traffic monitoring application status reported by the RSE. This includes current operational state and status of the RSE and a record of system operation.
traffic probe data Vehicle data that is used to determine traffic conditions. In a basic implementation, the data could be limited to time stamped unique identifiers that can be used to measure a vehicle’s progress through the network. In more advanced implementations, the vehicle may report current position, speed, and heading and snapshots of recent events including route information, starts and stops, speed changes, and other information that can be used to estimate traffic conditions.
traffic sensor control Information used to configure and control traffic sensor systems.
traffic situation data_cv Current, aggregate traffic data collected from connected vehicles that can be used to supplement or replace information collected by roadside traffic detectors. It includes raw and/or processed reported vehicle speeds, counts, and other derived measures. Raw and/or filtered vehicle control events may also be included to support incident detection.
traffic violation notification Notification to enforcement agency of a detected traffic violation including speed violations, HOV violations, and dynamic lane violations.
train operations data_ud Data provided as part of a Positive Train Control System including movement authorizations and speed limits.
transaction status Response to transaction request. Normally dealing with a request for payment.
transit and fare schedules Transit service information including routes, schedules, and fare information.
transit archive data Data used to describe and monitor transit demand, fares, operations, and system performance. Content may include a catalog of available information, the actual information to be archived, and associated meta data that describes the archived information.
transit emergency data Initial notification of transit emergency at a transit stop or on transit vehicles and further coordination as additional details become available and the response is coordinated.
transit fare and passenger status Information provided from the traveler location that supports fare payments, passenger data, and associated record-keeping.
transit fare information Information provided by transit management that supports fare payment transactions and passenger data collection.
transit fare information_ud Information provided by transit management that supports fare payment transactions and passenger data collection.
transit incident information Information on transit incidents that impact transit services for public dissemination.
transit information request Request for transit operations information including schedule and fare information. The request can be a subscription that initiates as-needed information updates as well as a one-time request for information.
transit information user request Request for special transit routing, real-time schedule information, and availability information.
transit multimodal information Transit schedule information for coordination at modal interchange points.
transit schedule adherence information Dynamic transit schedule adherence and transit vehicle location information.
transit schedule information Current and projected transit schedule information used to initialize the transit vehicle with a vehicle assignment, monitor schedule performance, and develop corrective actions on-board.
transit service coordination Schedule coordination information shared between local/regional transit organizations.
transit service information Transit service information including routes, schedules, and fare information as well as dynamic transit schedule adherence and transit vehicle location information.
transit system data Current transit system operations information indicating current transit routes, the level of service on each route, and the progress of individual vehicles along their routes for use in forecasting demand and estimating current transportation network performance.
transit traveler information Transit information prepared to support transit users and other travelers. It contains transit schedules, real-time arrival information, fare schedules, alerts and advisories, and general transit service information.
transit traveler request Request by a Transit traveler to summon assistance, request transit information, or request any other transit services.
transit user information Information about individual transit users boarding a transit vehicle, used to track a user's progress on a scheduled transit trip.
transit vehicle conditions Operating conditions of transit vehicle (e.g., engine running, oil pressure, fuel level and usage).
transit vehicle information_cv Information about the transit vehicle route and stops, including current location along the route and next stop.
transit vehicle loading data Data collected on board the transit vehicle relating to passenger boarding and alighting.
transit vehicle location data Current transit vehicle location and related operational conditions data provided by a transit vehicle.
transit vehicle operator information Transit service instructions, wide area alerts, traffic information, road conditions, and other information for both transit and paratransit operators.
transit vehicle schedule performance Estimated times of arrival and anticipated schedule deviations reported by a transit vehicle.
transportation system status Current status and condition of transportation infrastructure (e.g., tunnels, bridges, interchanges, TMC offices, maintenance facilities). In case of disaster or major incident, this flow provides an assessment of damage sustained by the surface transportation system including location and extent of the damage, estimate of remaining capacity and necessary restrictions, and time frame for repair and recovery.
traveler alerts Traveler information alerts reporting congestion, incidents, adverse road or weather conditions, parking availability, transit service delays or interruptions, and other information that may impact the traveler. Relevant alerts are provided based on traveler-supplied profile information including trip characteristics and preferences.
traveler archive data Data associated with traveler information services including service requests, facility usage, rideshare, routing, and traveler payment transaction data. Content may include a catalog of available information, the actual information to be archived, and associated meta data that describes the archived information.
traveler card update Information updated concerning traveler's personal data including items such as address, trip records, and profile data.
traveler information for media General traveler information regarding incidents, unusual traffic conditions, transit issues, or other advisory information that has been desensitized and provided to the media.
traveler payment information Payment information for road use charges.
traveler payment request Request for payment for road use charges.
traveler profile Information about a traveler including equipment capabilities, personal preferences, and traveler alert subscriptions.
traveler request A request for traveler information including traffic, transit, toll, parking, road weather conditions, event, and passenger rail information. The request identifies the type of information, the area of interest, parameters that are used to prioritize or filter the returned information, and sorting preferences.
trigger control Controls to enable or disable a particular trigger.
trip confirmation Acknowledgement by the driver/traveler of acceptance of a trip plan with associated personal and payment information required to confirm reservations.
trip plan A travel itinerary identifying a route and associated traveler information and instructions identifying recommended modes and transfer information, ride sharing options, and transit and parking reservation information.
trip request Request for trip planning services that identifies the trip origin, destination(s), timing, preferences, and constraints. The request may also include a request for transit and parking reservations and ridesharing options associated with the trip.
user VMT account reports Reports on VMT charges
user VMT account setup Billing information, vehicle information (or registration information), and requests for reports.
variable speed limit control Information used to configure and control variable speed limit systems including the equipment used to provide current speed limits and other information to drivers and the equipment used to monitor traffic and environmental conditions along the roadway.
variable speed limit control_cv Information used to configure and control variable speed limit systems including the equipment used to provide current speed limits and other information to drivers and the equipment used to monitor traffic and environmental conditions along the roadway.
variable speed limit status Current operating status of the variable speed limit systems including the state of the equipment.
variable speed limit status_cv Current operating status of the variable speed limit systems including the state of the equipment.
vehicle charging profile_cv Vehicle information provided to an electric charging station including the operational status of the electrical system, the charging capacity and charging rate for the vehicle, and % charge complete.
vehicle emissions data Measured emissions of specific vehicles comprised of exhaust pollutants including hydrocarbons, carbon monoxide, and nitrogen oxides.
vehicle environmental data_cv Data from vehicle safety and convenience systems that can be used to estimate environmental conditions, including measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, anti-lock brake status, and other collected vehicle system status and sensor information. The collected data is reported along with the location, heading, and time that the data was collected. Both current data and snapshots of recent events (e.g., traction control or anti-lock brake system activations) may be reported.
vehicle location and motion_cv Data describing the vehicle's location in three dimensions, heading, speed, acceleration, braking status, and size.
vehicle payment information Information provided for payment of tolls and parking fees including identification that can be used to identify the payment account or source and related vehicle and service information that are used to determine the type and price of service requested.
vehicle payment information_cv Information provided for payment of tolls or parking fees including identification that can be used to identify the payment account or source and related vehicle and service information that are used to determine the type and price of service requested. The information exchange normally supports an account debit to pay fees, but an account credit may be initiated where pricing strategies include incentives.
vehicle payment request Request for information supporting toll and parking payments.
vehicle payment update Data written to vehicle equipment to support electronic toll collection or parking payment.
vehicle probe archive data_ud Vehicle probe data collected for planning and analysis. The data includes a unique identifier, the route, travel time, and current location.
vehicle profile Information about a vehicle including vehicle type and equipment capabilities.
vehicle signage application info_cv In-vehicle signing application configuration data and messaging parameters. This flow provides a list of regulatory, warning, and information messages to be displayed and parameters that support scheduling and prioritizing messages to be issued to passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
vehicle signage application status_cv In-vehicle signing application status reported by the RSE. This includes current operational state and status of the RSE and a log of messages sent to passing vehicles
vehicle signage data In-vehicle signing data that augments regulatory, warning, and informational road signs and signals. The information provided would include static sign information (e.g., stop, curve warning, guide signs, service signs, and directional signs) and dynamic information (e.g., current signal states, grade crossing information, local traffic and road conditions, advisories, and detours).
vehicle signage data_cv
vehicle situation data parameters_cv A request for vehicle situation data that includes parameters used to control the data that is reported and the flow of data reported by the vehicle. This flow identifies the type of data/snapshots that are requested and reporting parameters such as snapshot frequency, filtering criteria (data thresholds for reporting), and reporting interval.
vehicle situation data_cv This flow represents vehicle snapshots that may be provided by the vehicle to support traffic and environmental conditions monitoring. Snapshots are collected by the vehicle for specific events (e.g., when a sensor exceeds a threshold) or periodically and reported based on control parameters when communications is available. Traffic-related data includes snapshots of measured speed and heading and events including starts and stops, speed changes, and other vehicle control events. Environmental data may include measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, anti-lock brake status, and other collected vehicle system status and sensor information. The collected data is reported along with the location, heading, and time that the data was collected.
video surveillance control Information used to configure and control video surveillance systems.
VMT cost data VMT charges per link.
VMT data A vehicle’s road use history that records where the vehicle has traveled over time. Optionally includes vehicle speeds as well as distance traveled for some applications. Information is accurate enough to distinguish between adjacent roads, adjacent lanes, and identify direction of travel on the roads.
VMT data for ISP Road use charge rate policies for distribution to travelers.
VMT equipment fault Provides fault status of the VMT data collection equipment in a vehicle and vehicle image and other characteristics to allow independent identification of the vehicle and its owner.
VMT equipment status Provides an indication of the operational status of the VMT data collection equipment in a vehicle. Also indicates vehicle ID (VIN) so that the registration of the equipment to a specific vehicle can be verified and confirmed by comparison with vehicle characteristics.
weather information Accumulated forecasted and current weather data (e.g., temperature, pressure, wind speed, wind direction, humidity, precipitation, visibility, light conditions, etc.).
widearea statistical pollution information Aggregated region-wide measured emissions data and possible pollution incident information.
work plan coordination Coordination of work plan schedules and activities between maintenance and construction organizations or systems. This information includes the work plan schedules and comments and suggested changes that are exchanged as work plans are coordinated and finalized.
work plan feedback Comments and suggested changes to proposed construction and maintenance work schedules and activities. This information influences work plan schedules so that they minimize impact to other system operations and the overall transportation system.
work zone information Summary of maintenance and construction work zone activities affecting the road network including the nature of the maintenance or construction activity, location, impact to the roadway, expected time(s) and duration of impact, anticipated delays, alternate routes, and suggested speed limits. This information may be augmented with images that provide a visual indication of current work zone status and traffic impacts.
work zone status Current work zone status including current location (and future locations for moving work zones), impact to the roadway, required lane shifts, expected time(s) and duration of impact, anticipated delays, alternate routes, and suggested speed limits.
work zone warning notification Notification of a work zone emergency or safety issue. This flow identifies that a work zone emergency or safety issue has occurred so that warnings may be generated by more than one system in the work zone.
work zone warning status Status of a work zone safety monitoring and warning devices. This flow documents system activations and includes additional supporting information (e.g., an image) that allows verification of the alarm.